Hey everyone, I am ready to get the trans dialed in on my 14 Sierra 5.3L. Engine side of things are dialed in and I am ready to focus on trans tuning. From what I've read the best results come from requesting quicker shift times and disable tq mngment upshifts and power downshifts.
So here's my real question as I dive into these tables. Do i start with the Shift Timing>upshift>torque adder tables and just start knocking those times down by 10% at a time on all tables or is the Transition Time tables where i start.
A little shove in the right direction would be greatly appreciated here. Thanks in advance!