Page 3 of 3 FirstFirst 123
Results 41 to 47 of 47

Thread: Just installed AEM 30-0310 it reads 1.5 to 1.6

  1. 05-11-2020 #41
    Jonblarc7
    Jonblarc7 is offline
    Advanced Tuner
    Join Date
    Apr 2017
    Posts
    311
    I just removed it to show other people that might stumble across this thread.

    aem.JPG


    Thanks again
    Reply With Quote Reply With Quote
  2. 05-11-2020 #42
    dr.mike
    dr.mike is offline
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Posts
    604
    Perfect. Thanks
    Reply With Quote Reply With Quote
  3. 12-01-2020 #43
    speed3642
    speed3642 is offline
    Potential Tuner
    Join Date
    Nov 2020
    Posts
    2
    Hey Mike,
    I am having same issue. What is the math conversion that works with this 30-0310 wideband I just purchased. My wideband is reading 1.4-1.5 at idle
    Reply With Quote Reply With Quote
  4. 12-01-2020 #44
    pmoore4321
    pmoore4321 is offline
    Tuner in Training
    Join Date
    Sep 2014
    Posts
    30
    The 30-0310 has a range of 8.09 to 29.4 AFR, right?
    Reply With Quote Reply With Quote
  5. 12-02-2020 #45
    Jonblarc7
    Jonblarc7 is offline
    Advanced Tuner
    Join Date
    Apr 2017
    Posts
    311
    Is it reading that at idle only. Mine max out and stay like that
    Last edited by Jonblarc7; 12-02-2020 at 01:06 PM.
    Reply With Quote Reply With Quote
  6. 12-02-2020 #46
    Jonblarc7
    Jonblarc7 is offline
    Advanced Tuner
    Join Date
    Apr 2017
    Posts
    311
    I post #25 in the Transform Selector I put 14.65 + 0 in there.
    Reply With Quote Reply With Quote
  7. 12-02-2020 #47
    pmoore4321
    pmoore4321 is offline
    Tuner in Training
    Join Date
    Sep 2014
    Posts
    30
    Maybe this is right? The manual shows lambda range of .55 to 2.00, but AFR range of 8.0:1 to 20.0:1(1.36 lambda).

    Screen Shot 2020-12-02 at 2.37.03 PM.png
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »