Results 1 to 5 of 5

Thread: Ford escape tune writing

  1. #1
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    37

    Ford escape tune writing

    Hey everyone just started getting into the tuning software and datalogging. Working on some MPG changes for DFCO and transmission settings. When I went to write the tune it stated I needed to clear the p0605 code. I did some searching on here but didnt really find an answer other then doing a full rewrite. Is there another way around this?

  2. #2
    Tuner in Training
    Join Date
    May 2019
    Posts
    46
    you should go to support on hp

  3. #3
    Tuner in Training
    Join Date
    Apr 2015
    Posts
    37
    Thanks I will send them a message with the details.

  4. #4
    Potential Tuner
    Join Date
    Nov 2018
    Posts
    9
    Quote Originally Posted by dubau2 View Post
    Hey everyone just started getting into the tuning software and datalogging. Working on some MPG changes for DFCO and transmission settings. When I went to write the tune it stated I needed to clear the p0605 code. I did some searching on here but didnt really find an answer other then doing a full rewrite. Is there another way around this?

    Its only when you try to write calibration only, You can select write entire or go to engine diag and find p0605 and select no error reported

  5. #5
    Potential Tuner
    Join Date
    Jul 2019
    Posts
    2
    What year Escape are you tuning ?