Results 1 to 1 of 1

Thread: Laptop crashed---need help with Scanner

  1. #1
    Advanced Tuner coachcrow56's Avatar
    Join Date
    Dec 2004
    Location
    Longview, Texas
    Posts
    305

    Need Wideband---AFR Error Help--Please!!

    I have MPVI-2 and I am logging thru the EGR for my LC-1 wideband, but I cannot get it to work. I want to add AFR ERROR too, but I understand that will not work until my wideband is working correctly.

    I have worked on this for weeks now----I have everything working as follows----Spark Advance, Spark Retard, O2, LTFT, and STFT---they work perfectly.

    I have tried for weeks to add my LC-1 WB to the scanner with no success. When I start scanning, the wideband disappears from the Channel List.

    On the graph for the LC-1, a blue box moves around the graph, but there are no numbers displayed in the box.

    Would somebody please take a look and see what I am missing??

    1 HAVE A 150 SHOT OF NITROUS SET UP, AND I NEED MY WIDEBAND----SOMEBODY HELP ME!!


    I am attaching three files, a short scan, a layout, and a channel config.
    Attached Files Attached Files
    Last edited by coachcrow56; 05-01-2020 at 05:37 PM. Reason: Need help
    2.8/3.0/3.2 Pulley/ZZP CAI/1.6 HS Rockers/Hi Energy Comp Cam 76-802-9/LS7 Lifters/ZZP Stage 2 Intercooler/TOG Headers/Triple Edge Performance Stage 3 Transmission/3.29 Ratio/NGK TR6ix IRIDIUM .40 GAP/ZZP Fuel Rails/ZEX 100 shot NOS/GMPP Sway Bars/KYB Adjustable Struts/Power Stop Performance Pads/Rotors