Burble tuning SRT8 2015

[330]

Try to find burble? read all forum for this but nothing.
Try to change DFCO, MBT, MIN, Part,WOT timing table but in log no minus ignition
Any one help?

[SultanHassanMasTuning]

you always need to pay attention to P-ratio/load

try this

rev10_pops&bang TEST.hpt

[330]

Thank you in advice but nothing
I see DFCO work perfect and switch off injectors, trying to disable DFCO but no succsess, always INJ 0ms at decseleration

[SultanHassanMasTuning]

log

also why did you disable ANN?

rev10_pops&bang TEST.hpt

[330]

log

also why did you disable ANN?

rev10_pops&bang TEST.hpt

Car with tune camshaft, intake, exhaust, throttle

[330]

No crackle at last test file

Log in attachment

[SultanHassanMasTuning]

try doing with while in gear decel

[330]

try doing with while in gear decel

Nothing, dont log on road but silence

[330]

Any idea?

[f.creek-ranch]

most cars responses by setting part throttle/ decelerating spark from stock - most 40* to 10*.

Rest u can play with dfco.

I dont use crackle under city conditions, cops are mostly boring people.

[f.creek-ranch]

Set your dfco conditions to disable dfco in a wide band for the test.

enable ect 190*
disable rpm 1500
enable vss 200
disable vss 190
delay 100

maybe one of these will cut fuel.