Results 1 to 5 of 5

Thread: setting up WB channel, serial port method running E85

  1. #1
    Potential Tuner
    Join Date
    Jan 2020
    Posts
    6

    setting up WB channel, serial port method running E85

    can anyone give me some tips on setting up my AEM wideband channel through my serial port running E85?

    I actually have the USB cable and the Serial Port all set up I just don't know how to transform the correct configuration I need to have an my histogram read accurately running E85.

    thanks

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Lots of information regarding serial connections can be found here https://forum.hptuners.com/showthrea...eband-Feedback
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Potential Tuner
    Join Date
    Jan 2020
    Posts
    6
    Just read through that. Doesn't look like anyone had luck setting up the AEM 30-0300 WB

  4. #4
    Potential Tuner
    Join Date
    Jan 2020
    Posts
    6
    I have the WB in the channels and the histogram setup, it's just the readings on the histogram are way off.....and I'm not sure if the WB in the channel list is reading correctly.
    Attached Images Attached Images
    Last edited by 30th t/a; 04-24-2020 at 03:49 PM.

  5. #5
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,970
    when u look in the transform u should be able to select your WB brand/number and it should set the transform for it, if not u can adjust it for it or add in the info from the manual to suit it