-
Tuner in Training
AEM 30-5143 Not Logging Properly
I am very new to HP, so please cut me some slack.
I have an AEM 30-5143 E85 wideband. I tried to set it up per these ancient instructions https://forum.hptuners.com/showthrea...oltages-How-to
However, I have a feeling this doesn't work the same as it used to. I have VCM Scanner version 4.6.3. After doing the math and entering the numbers accordingly, the data displays a constant 11.96 unless I snap the throttle. Then it does something for a split second. Can somebody walk me through the unsupported wideband setup process in terms of the latest Pro software? Thanks!
1.png
Last edited by V6Buicks; 04-26-2020 at 10:27 AM.
-
Tuner in Training
It seems that I have a different issue which needs to be sorted out. Nevermind.
https://youtu.be/dlRyJy8Uo0k
Last edited by V6Buicks; 04-26-2020 at 08:40 PM.
Reason: grammar
-
Tuner in Training
https://youtu.be/GUtV8cyNgzc
This is odd. Either the signal is not linear or there's some sort of weird negative offset built into the gauge. Either way, I contacted AEM about it. Hopefully they can help.