Results 1 to 3 of 3

Thread: AEM 30-5143 Not Logging Properly

  1. #1
    Tuner in Training
    Join Date
    Aug 2017
    Location
    Franklin, IN
    Posts
    29

    AEM 30-5143 Not Logging Properly

    I am very new to HP, so please cut me some slack.

    I have an AEM 30-5143 E85 wideband. I tried to set it up per these ancient instructions https://forum.hptuners.com/showthrea...oltages-How-to
    However, I have a feeling this doesn't work the same as it used to. I have VCM Scanner version 4.6.3. After doing the math and entering the numbers accordingly, the data displays a constant 11.96 unless I snap the throttle. Then it does something for a split second. Can somebody walk me through the unsupported wideband setup process in terms of the latest Pro software? Thanks!
    1.png
    Last edited by V6Buicks; 04-26-2020 at 10:27 AM.

  2. #2
    Tuner in Training
    Join Date
    Aug 2017
    Location
    Franklin, IN
    Posts
    29
    It seems that I have a different issue which needs to be sorted out. Nevermind.
    https://youtu.be/dlRyJy8Uo0k
    Last edited by V6Buicks; 04-26-2020 at 08:40 PM. Reason: grammar

  3. #3
    Tuner in Training
    Join Date
    Aug 2017
    Location
    Franklin, IN
    Posts
    29
    https://youtu.be/GUtV8cyNgzc

    This is odd. Either the signal is not linear or there's some sort of weird negative offset built into the gauge. Either way, I contacted AEM about it. Hopefully they can help.