Results 1 to 7 of 7

Thread: Ghost camming a barra

  1. #1
    Potential Tuner
    Join Date
    Mar 2020
    Posts
    4

    Ghost camming a barra

    Hi All,
    i have searched and cant find any info so i will ask if anyone can point me in the right direction to ghost cam a barra this is purely for private use only for our own skid cars and will not be used for any commercial purposes.
    Thanks.

  2. #2
    Potential Tuner
    Join Date
    Mar 2020
    Posts
    4
    For those following with interest i have been told this cannot be done with hp on a ford barra.if anyone knows differently we would like to know.thanks

  3. #3
    Advanced Tuner
    Join Date
    Jul 2009
    Posts
    326
    HP doesn?t have access to the scalars to force the cams into the correct mode at idle.

  4. #4
    pcm tec can do this, need workshop version tho, but a good write up on there forum

  5. #5
    Tuner in Training
    Join Date
    Mar 2019
    Posts
    31
    well thats lame I was looking forward to trying this

  6. #6
    Anyone dine this yet I have played around and got a similar effect

  7. #7
    Senior Tuner
    Join Date
    Jul 2020
    Location
    VIC Australia
    Posts
    1,107
    Can't be done with HP tuners. You must use PCMTEC to implement.