Results 1 to 2 of 2

Thread: Transfer Scanner UPF File?

  1. #1
    Advanced Tuner 96gt4.6's Avatar
    Join Date
    Aug 2008
    Location
    Kansas
    Posts
    489

    Transfer Scanner UPF File?

    I'm wanting to be able to setup log config files on a desktop PC that has never or can never be connected to a vehicle. Currently, the only thing I can do in the scanner is open a log file on that PC, but after you close the log file you are unable to do anything else, as there are no vehicle populated under the Vehicle>Vehicle profile section.

    I had thought I had read one time that, if you go under the HP Tuners install folder, located at: HP Tuners>VCM Scanner>Vehicles, and move all of those .UPF files to said PC, you could then config on that PC as it would be as if it had connected to those vehicles at some point?

    Does not seem to work though.....but it's been a while.

    Surely there is a way to load and setup log config tables/graphs without 1st having to connect to said vehicle with that PC directly?
    '17 Whipple'd S550
    Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw

  2. #2
    Advanced Tuner 96gt4.6's Avatar
    Join Date
    Aug 2008
    Location
    Kansas
    Posts
    489
    Please delete, found what I was looking for with a little more searching!

    Transferred the whole HP Tuners folder and we good .

    https://forum.hptuners.com/showthrea...ffline-profile
    '17 Whipple'd S550
    Too many other projects to list.....see my YouTube channel for more: https://www.youtube.com/channel/UCr7...-XfDG53sCh6tcw