Results 1 to 4 of 4

Thread: Frustrated with New 4.4.4---wideband will not work

  1. #1
    Advanced Tuner coachcrow56's Avatar
    Join Date
    Dec 2004
    Location
    Longview, Texas
    Posts
    305

    Frustrated with New 4.4.4---wideband will not work

    Over a year ago I upgraded to MPVI2----and downloaded the software---I think it was 3.0. Wideband and everything worked fine. Two months ago my laptop died. I got a new laptop and downloaded the new 4.4.4 software. I have tried for 2 weeks to get my LC-1 WB to work---nothing. I am not upgrading to the PRO version just to get my wideband to work. Anyone know a trick to get my WB to work with 4.4.4? Very frustrated with HPTuners.

    If I am wrong about all this, someone please correct me.


    PLEASE DELETE THIS THREAD
    Last edited by coachcrow56; 05-06-2020 at 06:46 AM. Reason: DELETE THIS THREAD---PLEASE
    2.8/3.0/3.2 Pulley/ZZP CAI/1.6 HS Rockers/Hi Energy Comp Cam 76-802-9/LS7 Lifters/ZZP Stage 2 Intercooler/TOG Headers/Triple Edge Performance Stage 3 Transmission/3.29 Ratio/NGK TR6ix IRIDIUM .40 GAP/ZZP Fuel Rails/ZEX 100 shot NOS/GMPP Sway Bars/KYB Adjustable Struts/Power Stop Performance Pads/Rotors

  2. #2
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774
    Look up how to run the WB thru the EGR wire? I've never done this before myself but I've read about it. Might be worth it. Considering your mods listed, I'm willing to bet your EGR is deleted. Or have you already set this up?
    Daily Driver= 2003 BMW 330xi
    Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
    Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
    Truck= 2007 Chevy Silverado 1500 LT LY5 4x4

  3. #3
    Advanced Tuner coachcrow56's Avatar
    Join Date
    Dec 2004
    Location
    Longview, Texas
    Posts
    305
    Yes, my EGR is deleted, but I am getting the 5 volts I need for the WB from the EGR connection. I have EGR volts set up in my Channels. That is how I set up my WB in the older versions of VCM SUITE----now in this new version, 4.4.4, it will not work.


    I have a blue box that moves around the Graph area, but the box is empty, no numbers are displayed. So I know the WB is reading, I just have a blank box.
    Last edited by coachcrow56; 05-04-2020 at 12:32 PM.
    2.8/3.0/3.2 Pulley/ZZP CAI/1.6 HS Rockers/Hi Energy Comp Cam 76-802-9/LS7 Lifters/ZZP Stage 2 Intercooler/TOG Headers/Triple Edge Performance Stage 3 Transmission/3.29 Ratio/NGK TR6ix IRIDIUM .40 GAP/ZZP Fuel Rails/ZEX 100 shot NOS/GMPP Sway Bars/KYB Adjustable Struts/Power Stop Performance Pads/Rotors

  4. #4
    Advanced Tuner coachcrow56's Avatar
    Join Date
    Dec 2004
    Location
    Longview, Texas
    Posts
    305
    Administrators----PLEASE DELETE THIS THREAD
    2.8/3.0/3.2 Pulley/ZZP CAI/1.6 HS Rockers/Hi Energy Comp Cam 76-802-9/LS7 Lifters/ZZP Stage 2 Intercooler/TOG Headers/Triple Edge Performance Stage 3 Transmission/3.29 Ratio/NGK TR6ix IRIDIUM .40 GAP/ZZP Fuel Rails/ZEX 100 shot NOS/GMPP Sway Bars/KYB Adjustable Struts/Power Stop Performance Pads/Rotors