Transient fueling issues

[[email protected]]

So far all I can see is to turn off transient all together and dian in MAF best you can then turn transient fueling back on and adjust for the EQ changes found between having transient off and then back on.
I thought I'd set MAF and SD tables and be good but the stock tune is hosed up 8 ways to Sunday between tables unpopulated or just filled with single values. What a nightmare to un-smurf stock...

[[email protected]]

So would the other transient values have to be done in a new thread or can we continue working on transient values here?
Minimum pulse width adders, accel/deceleration ratios, wall setting, etc?