Got a small issue on my car not wanting to do a burnout, not sure how long its been like this cause i don't normally do burnouts but after a track rental a few weeks ago i noticed it. I looked over the most noticeable TQ management and found no real solution. Just looking for ideas on what might be the cause. I can post a Log of the related issue if needed.
Basically it pulls all the timing out down to -18* whenever you try to brake torque the car, like it flashing the converter. Release the pedal and the car will take off and add all the timing back in and just blows tires off. Only way around this is not foot braking the car. Would this be related to TCM settings? Or PCM?