Results 1 to 3 of 3

Thread: A few pointers please

  1. #1
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    177

    A few pointers please

    Hi and hope your all doing well, hot rod has sat for over 6 months due to hip replacement and this virus thing. today i've rewired and set the MTXL to read 1.0 Lambda. so i start it up and run it to temp, MTXL reads lower and lower till i have about 1.05 to 0.95 readings, but the laptop is showing me running rich at 11.59, i still have to alter this. an pointers ?
    Attached Files Attached Files
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning

  2. #2
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    177
    I've just realised i've forgotten to plug the MTXL in to the logger .... doh !
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning

  3. #3
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    177
    Is there any reason why it's pegged at 11.40 all the way through the run ? has something changed ?
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning