I have an 04 GTO with FAST 102 TB and intake, ported 243s, and FAST 60 lb injectors. I am concerned that I am missing something because even with my VE table increased by 40%, my wideband is reading pretty lean basically everywhere. I updated the Injector Flow Rate, failed the MAF, disabled DFCO and STFTs and set the Close Loop Enable temps to 284. I am also resetting LTFT and disabling LTFT Learn from the scanner. Just wanting to know if there is something I am missing or doing wrong because it seems like my VE numbers are going to end up really high if this is actually right.
Thanks