Results 1 to 2 of 2

Thread: 2011 Avalanche tach question.

  1. #1
    Potential Tuner
    Join Date
    Sep 2018
    Location
    MICHIGAN
    Posts
    6

    2011 Avalanche tach question.

    Hi All, In process of building a 6.2 for my Avalanche. My question is I've been playing with HP tuners on my 5.3 for awhile now, is there anything I can do to get the dash tach to go past 6,000. Want to keep a better eye on rpm once i swap over, also its just annoying to watch tach stop climbing before shift. If nothing I can do with programmer is there any companies out there that address this or am i going to have to deal with it?? Thanks for any advise.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    The cluster stops are 6,000rpm, there is no way to make it go past that when needle stops there.

    Run a separate rpm gauge or something like a scangauge 2 on the dash or an EDGE cts monitor screen for extra information.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.