Was doing some research last night and was wondering if there is a way to tune throttle cracker on a 02 camaro m6 converted to a th400? The clutch switch was used as a park neutral switch on the new shifter. I was under the impression throttle cracker is reliant on the clutch switch. Is there a way to force input/output to tune throttle cracker. Car does have vss hooked up to drivers side wheel.
Throttle cracker is based off speed which I’m sure you don’t have VSS with th400
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
I have vss hooked up to abs sensor and speedo is accurate based a tire size formula.
If that’s the case will work like normal
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
Hmm. Doesn?t seem to work . I am running a manual m6 file and like I said clutch switch is on the shifter for starting purposes.
I?m wondering if I should go to a non elec auto and start from there. I think with the m6 files it?s reliant on the clutch switch? I been searching with really no luck. I?m gonna try and get a tune posted.
Log and see... some files (annoyingly) will disable the TC airflow on clutch in but not out. Try changing the clutch state and see what you get.
Reply With Quote
