Hi guys,

I'm seeking a bit of help.

I have a BF2 XR6 with 4 speed auto that im converting to turbo. I have worked out all the turbo logic, fuel and spark maps etc. what im chasing is a bit of info on firming up the shifts on the box, its only a 93le at the moment but once it fries i have a built 95le to go in.

is there a way of adjusting the line pressure in vcm suite?

also is it possible to set the tcm to shift as normal in 'D' but then be manualised shifting in tiptronic mode?

Cheers