Results 1 to 3 of 3

Thread: 05 ram 5.7 hemi

  1. #1
    Tuner in Training
    Join Date
    Dec 2017
    Location
    479
    Posts
    23

    05 ram 5.7 hemi

    First time dodge tuner. Iv done several gm.
    When I go to read the ecm and tcm I have to select what controllers are there. I have these for the ecm, JTEC+, JTEC+B and NGC3. for the tcm it has NGC3X. When I select read after the 3 second key off on, it times out. that is with the NGC3X trans tcm selected. Im using MPVI1.

  2. #2
    Tuner in Training
    Join Date
    Dec 2017
    Location
    479
    Posts
    23
    First time dodge tuner. Iv done several gm.
    When I go to read the ecm and tcm I have to select what controllers are there. I have these for the ecm, JTEC+, JTEC+B and NGC3. for the tcm it has NGC3X. When I select read after the 3 second key off on, it times out. that is with the NGC3X trans tcm selected. Im using MPVI1. My question is what controller do I choose from?

  3. #3
    Tuner in Training
    Join Date
    Apr 2020
    Posts
    18
    05 should be a NGC3