Results 1 to 3 of 3

Thread: VCM Editor Engine diagnostics DTC's page not presenting properly

  1. #1
    Tuner in Training
    Join Date
    Oct 2018
    Location
    Ontario Canada
    Posts
    42

    VCM Editor Engine diagnostics DTC's page not presenting properly

    I'm running windows 7 home premium on a higher end Dell laptop with ver 4.6.3. The program runs fine except for one problem which has to do with the DTC's page in the Engine diagnostics part of the program. The page does not present all the columns properly and does not allow any column resizing at any window size or when the windows is maximized. I can only read the first 4 digits ie PO10??. The description is fine, the SES Enab shows the check box but the full title is cut off and the Error mode Column only gives me the first 15 or so characters and no ability to modify. This problem existed with previous versions of HP tuners and did not resolve with the upgrade to ver 4.6.3.

    I'm assuming this is a windows problem but have no idea about how to resolve it ( if that's possible).

    Has anyone experienced a problem like this? Does anyone have a solution for it?

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    in your windows display settings set to 100%(recommended) as this cures the vast majority of issues such as this.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Oct 2018
    Location
    Ontario Canada
    Posts
    42
    Yes, that solved the problem. Thanks