Results 1 to 3 of 3

Thread: transfer file to ngauge

  1. #1
    Potential Tuner
    Join Date
    Jun 2020
    Posts
    1

    transfer file to ngauge

    how to? any suggestions?

    eddie

  2. #2
    Tuner
    Join Date
    Mar 2019
    Location
    Tierra Verde, FL
    Posts
    157
    https://static.summitracing.com/glob.../nge-62001.pdf

    This is step by step instructions.

  3. #3
    Tuner
    Join Date
    Mar 2019
    Location
    Tierra Verde, FL
    Posts
    157
    Step 3: Save and load custom tunes onto the nGauge.
    To load tunes onto the nGauge (so they can be swapped by your customer), save your .hpt file, then press FILE > EXPORT > To E-motion. This will convert the HPT file to a .enc file.
    As an example, it will convert Mustang_Nitrous_Tune_001.hpt to Mustang_Nitrous_Tune_002.enc
    Drag and drop the .enc file onto the CUSTOM FILES folder on the nGauge SD card. You can include up to 20 files. You can also safely email .enc files to your customer, and they can then drag and drop them into the custom files folder.