Results 1 to 3 of 3

Thread: Scanner information missing on 15 Camaro SS

  1. #1
    Potential Tuner
    Join Date
    Jun 2020
    Location
    Texas
    Posts
    2

    Scanner information missing on 15 Camaro SS

    Currently I have an MPVI2 and my scanner is missing the needle on the tack display and nothing shows in the knock retard displays, throttle or fuel trims. They are present and everything works fine when I hook the scanner up to my 2001 Silverado, but nothing seems to be working on my Camaro. I'm lost here, has anyone had this happen before?

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    Connect to the vehicle and then re-poll for supported parameters. See if that will make them work.

    If not, remove the channels from the main channels list, re-poll and then add the channels back in.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Potential Tuner
    Join Date
    Jun 2020
    Location
    Texas
    Posts
    2
    I believe I have a wire in the wrong place on the Flex Fuel sensor I just installed. Tomorrow I'll see if this fixes it.