Results 1 to 4 of 4

Thread: 2017 GT Axle overtemp on dash since Roush flash

  1. #1

    2017 GT Axle overtemp on dash since Roush flash

    I have flashed a Roush blower tune in a 2017 GT , since I have Axle overtemps and Diff Temps control , that car doesnt have that feature , I dont find anything in the tune related to that sensor .. ???

  2. #2
    Tuner
    Join Date
    Mar 2019
    Location
    Tierra Verde, FL
    Posts
    157
    Assuming you dont have a PP GT, you might be able to change the build spec using Forscan and delete those sensors. Not 100% sure.

  3. #3
    How can I need forscan to delete something HPT change ?

  4. #4
    the FRPP tunes also remove a link that lets the axle temp sensor display. i dont know what in the tune does it, but using the mpvi2 to flash back to the stock OS and its fixed. flash the frpp tune again using mpvi2 and its no longer there. must be something in the FRPP OS which i believe is who/what the roush kits are based off of.

    you can remove the axle temp as a display in the IDC module using forscan. very simple to use, use the editor that is labeled and tells you what you are changing. no need to go into the hex side. you'll need the dongle that can switch HS/MS sides of the can system