Results 1 to 1 of 1

Thread: Starting issues gen4 swap

  1. #1
    Potential Tuner
    Join Date
    Nov 2017
    Location
    Southern ca
    Posts
    1

    Starting issues gen4 swap

    Hi everyone, I?m new here and am having some issues and want to check to see if it?s my tune or a wiring issues. I have an 09 ly6 swapped into a 65 chevelle. I am using stock 38 ecu and harness. Harness converted to standalone, twin turbos and cam added. Paid for a tune to my specific parts but I?m not getting spark or fuel.fuel pressure good in the rails, 58psi. Vats disabled. 12v Power to injectors but no pulse cranking .12v power to coil also off harness cranking and non cranking. Grounds good everywhere. New crank and cam sensors. Any ideas?? I added my files. maybe somebody can see a problem ????? thanks
    Attached Files Attached Files
    Last edited by Joshale43; 06-30-2020 at 10:44 PM.