Results 1 to 4 of 4

Thread: New user, sequence for clearing codes please

  1. #1
    Potential Tuner
    Join Date
    Jul 2020
    Location
    SW PA
    Posts
    4

    New user, sequence for clearing codes please

    Hello, I am a new user coming over from Diablo. I just started my email tuning with my tuner and twice I have had codes pop up. What is the sequence to clearing them using the hpt please instead of using my Diablo? I went to diagnostics on the editor but unsure what to uncheck since there are already a bunch that have been checked by the tuner. I have searched but am only finding posts of specific codes others are having trouble with. Thank you in advance.

  2. #2
    Tuner in Training
    Join Date
    Sep 2018
    Location
    GA USA
    Posts
    36
    For clearing codes you'll open the VCM Scanner NOT Editor then click on the "Engine" logo which will be Diagnostics and Info, read DTCs then clear DTCs and you should be set.

  3. #3
    Potential Tuner
    Join Date
    Jul 2020
    Location
    SW PA
    Posts
    4
    Thank you Mag

  4. #4
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    873
    Problem comes when the codes are permanent. Only the PCM can clear those when it sees the correct values it is looking for.