First Time Caller, long time car idiot.... Thanks for listening....
Current project is a 2014 BRZ/LS3/TR6060. BRZ is a pushbutton start, and I have a translator to send that over Canbus to my E38 ECM. Push start, and do not get 12v out of the Starter Relay enable. With my HP tuners hooked up, I see the request to crank and the starter relay enable go to Yes. Vats deleted, Clutch Safety disabled, and Starter Diags disabled. If I take my power probe and shoot 12v down the starter relay enable wire(Pin 52, Purple/White) the car turns over. So its not the Subaru relays, Its something in the ECM.... Ive attached my tune just in case I missed something... Any ideas would be appreciated..