Results 1 to 1 of 1

Thread: Could someone please educate me on the tcc apply ramp table

  1. #1

    Could someone please educate me on the tcc apply ramp table

    I seem do be understanding the labels differently than they are intended to be interpreted. I am assuming the pressure numbers in the table are in addition to the tcc regulator offset. is this incorrect? I say that is incorrect because ultimately I am trying to get my converter to see offset pressure at all times(tcc regulator gain set to 0 and tcc adapts turned off) yet when I add to the apply ramp all it does is cause the converter to lock and unlock constantly at steady state cruise. Please someone enlighten me as to what im missing. I have the offset set to 90 psi and im lucky to see 50 cruising which with my triple disc is not quite enough.

    Thanks so much for any input
    Attached Files Attached Files
    Last edited by DENALI62; 07-05-2020 at 02:57 PM.