-
Tuner
2.0 stuck, hitting a wall for more power
Looking to push my 2.0 a little further but I hit a wall and cant seem to get passed. The only limiter I see is Turbo FMEM but that?s not until 4900 rpm. I have already increased the turbo airflow limit, maybe I need to up that some more. But my goal is to have more torque above 3000. What I dont understand is that in my 1st log at WOT the car only gets a reported 240 tq and 1.97 air load. But doing a second long moments later while still driving, at part throttle 70%-75% throttle, I can get a reported 265 tq and 2.05 air load at 3400 rpm an holds 250 tq until I let off.
I don?t log my map points anymore so I can get better resolution but whe I did, at WOT it goes?.
RPM Map points
2000 9
2500 9
3000 9
3500 8
4000 8
4500 6 7
5000 6 7
5500 0 11
6000 0 11
Any help would be appreciated. Thanks.
WOT log.hpl
part throttle.hpl
Don't know why but my tune wont upload. Here is a link to it on my Google drive.
https://drive.google.com/file/d/1VG-...ew?usp=sharing
-
Tuner
Need you approve access to the tune file via google drive
-
Tuner
Should be good now, sorry, thought it was shareable.
-
Tuner
-
Advanced Tuner
Looking at the airflow limits for the turbo, it seems like it might be a similar turbo to what the Mustang has... Just a guess, the values are pretty close to the 2.3 stock values.
As I understand, a "Turbo FMEM" airlimit source is the turbo airflow limit table, so you might just have to go a lot higher.
Here's my current airflow limits:
airflow_limit_v18.png
Which are a copy/paste from an HRI 2.3 Focus RS tune.
-
Tuner
So upping the airflow table got rid of the turbo fmem, but the car still feels no better than stock. I noticed that I get more air load and torque is higher during part throttle. In the log, I very slowly increase throttle and as soon as I get into wot, torque and air load go down by about 30 tq. I can repeat this every time.
Any other helpful tips?