is it possible to make a bone stock 4x4 transfer case AWD or is that just not possible
is it possible to make a bone stock 4x4 transfer case AWD or is that just not possible
Not a tuning question but no. 4x4 transfer cases have two values, engaged or not engaged. If you wanted AWD you'd need to swap it with an AWD case. The key here is you can't drive around with the front and rear end spinning at the same RPM 100% of the time. AWD cases split the power and act more like differentials
1998 GMC K1500 Z71
* L31 350 Vortec
* AUS 43lb injectors
* Comp 08-410-8 with 1.6 rockers
* P59 swap
* Whipple supercharger
* JBA headers
* AFR 190cc heads
* NV4500 swapped
* Cal-Trac traction bars
* 1" blocks, 265/70r17 BF Goodrich KO2s, 17X8.5 ALPHAEQUIPT COMMAND LT
Reply With Quote