Anyone have any input on this? Everyone I have talked to has never seen it before.
I am dialing my VVE table - MAF is turned off.
This is a C6 LS3 with just headers.
I see no spike in my VVE table.. Completely perplexed as to what would cause this.
Duty is 200%
Cyl Airmass is 3.39
Torque is around ~1600ftlb
This has happened 3 times. Finally caught it on a log.
Spike.png
Spike Chart.png
Spike Graph.jpg
Spike Table.png
Tune attached.
Step 5 new zone boundries.hpt