i am working on setting up my hptuners for a 98 2.2 S10, i cannot get any histograms to work, i have been on here for 2 hours reading, and i am not getting it. my table display is determined from the vehical, i cannot add or remove from it, or so it seems. that being said it then tells me that there is not enough supported parameters in the table to support histograms? where is i missing it at, here is a stock chart and recent log for you to view.
http://mysite.verizon.net/whenn1/HPT...ustomHisto.swf this might help.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Try this config file, I just made your spark timing, knock retard,VE-Low Rpm LTFT, and VE-Low Rpm STFT histograms for your S10.There are others that you might need (wideband, AFR % error, etc) This is just a quick example.
I hope this will give you some insight on how to set up the histograms. Remember, if the pids are inserted and supported in the table display,
you can create histograms for those items.
Russ Kemp
what exactly is considered low rpm??
Reply With Quote