Results 1 to 8 of 8

Thread: Need help setting up graph/histogram

  1. #1
    Tuner
    Join Date
    Aug 2016
    Location
    SE WI
    Posts
    87

    Need help setting up graph/histogram

    New to HPT. Watched a Greg Banish Gen V tuning video and he referenced a MAP/Baro calc for measuring. Can someone explain to me how to setup?

    TIA

  2. #2
    Tuner in Training
    Join Date
    Oct 2018
    Posts
    43
    I'm assuming so you can dial in your vve table?
    2016 Silverado CCSB L83/6l80e
    TSP cam 218/226, .635"/.635", 113 LSA 10% FL
    TSP LT headers
    Circle D Billet converter

  3. #3
    Tuner
    Join Date
    Aug 2016
    Location
    SE WI
    Posts
    87
    Yes. I've done Gen 3/4 in the past with EFLIve. Just new to HPT and the Gen V.

  4. #4
    Advanced Tuner
    Join Date
    Aug 2010
    Location
    Detroit, MI
    Posts
    926
    What do you mean MAP/Baro calc? Measured MAP and/or baro or calculated MAP or calculated baro..? That could mean a lot of things.

  5. #5
    Tuner in Training
    Join Date
    Oct 2018
    Posts
    43
    Quote Originally Posted by DCZ View Post
    Yes. I've done Gen 3/4 in the past with EFLIve. Just new to HPT and the Gen V.
    sent you a pm
    2016 Silverado CCSB L83/6l80e
    TSP cam 218/226, .635"/.635", 113 LSA 10% FL
    TSP LT headers
    Circle D Billet converter

  6. #6
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,359
    The Pressure Ratio (MAP/Baro) is a predefined Math parameter in the Scanner. Just be sure you're logging the PID's that are defined in the Math parameter.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  7. #7
    Tuner
    Join Date
    Aug 2016
    Location
    SE WI
    Posts
    87
    Silv: Thanks for help.

  8. #8
    Tuner
    Join Date
    Aug 2016
    Location
    SE WI
    Posts
    87
    Quote Originally Posted by TriPinTaZ View Post
    The Pressure Ratio (MAP/Baro) is a predefined Math parameter in the Scanner. Just be sure you're logging the PID's that are defined in the Math parameter.
    Thanks. Appreciate the reply..