Results 1 to 2 of 2

Thread: Does VATS delete work on a 3.5L with P12 PCM

  1. #1
    Potential Tuner
    Join Date
    Jun 2020
    Posts
    1

    Does VATS delete work on a 3.5L with P12 PCM

    I'm doing an engine swap with a Chevy I5 3.5L into a Jeep. I'm using the P12 PCM. Does deleting VATS remove the need for a BCM to start the motor. If not, is there some way to work around it?

    Thanks!

  2. #2
    Tuner in Training DanN's Avatar
    Join Date
    Jul 2019
    Location
    Shuswap, BC, Canada
    Posts
    18
    Well, I'm a pretty green noob myself, but I would think if your ECU is supported then yes, the VATS should do it. That is how I got my L61 running where it had no business being.

    I would go into the repository and download the tune file for your setup and make sure VATS is there. I can't imagine it not being there.
    1972 Triumph Spitfire Ecotec Swap
    MEFI-4B & L61 - deceased; ate it's own balance shafts - because I did a dumb.
    E37 & GenII L61 - Runs great! (extracted from an '07 Pontiac Pursuit / G5)
    LSJ for the future..?