Results 1 to 14 of 14

Thread: silverado tune and log

  1. #1
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17

    silverado tune and log

    can someone check this out and give there opinion
    Attached Files Attached Files

  2. #2
    Senior Tuner
    Join Date
    Mar 2011
    Location
    Ripley, MS
    Posts
    1,865
    That's just a stock tune. Do you have your revised tune available?

  3. #3
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    its not a stock tune go look at the change history logs

  4. #4
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    just have issues with AC it works fine in park but in gear idle is up and down and compressor clutch doesn't kick in until I start moving again

  5. #5
    Tuner in Training bigjohnjed's Avatar
    Join Date
    Jan 2020
    Location
    Boise , Idaho
    Posts
    12
    not sure but disable conditions say enable at 4000 rpm disable at 4000

  6. #6
    Senior Tuner
    Join Date
    Mar 2011
    Location
    Ripley, MS
    Posts
    1,865
    Quote Originally Posted by Silveradored1988 View Post
    its not a stock tune go look at the change history logs
    My mistake. I must not have had my coffee yet.

    If the idle has some surge in it, it will go into stall saver mode. Once you get the fuel tables dialed in, the surge will be eliminated. That will certainly help. You can also drop your stall saver tables a bit.

  7. #7
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    ok across the board or just up to about 900 rpms? and other than that what do u think the rest of the tune looks like

  8. #8
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    Drop stall saver across the board or just idle areas?

  9. #9
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    27
    2000 Chevy Silverado Zack Conner Tune 11 Final.hpt
    If your Truck is otherwise stock try this file. This is a file i worked on for a while on a 2000 5.3 silverado. All LTFT's are within -1%. Truck drives great and pulls very good.

  10. #10
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    Quote Originally Posted by Jace Jackson View Post
    2000 Chevy Silverado Zack Conner Tune 11 Final.hpt
    If your Truck is otherwise stock try this file. This is a file i worked on for a while on a 2000 5.3 silverado. All LTFT's are within -1%. Truck drives great and pulls very good.
    what all did the 2000 have done to it

  11. #11
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    27
    Nothing it was bone stock. But the stock VE table on those trucks is horrible. This is set for 91 octane, truck drives amazing and shifts perfectly. I have updated the tune and will post tomorrow.

  12. #12
    Tuner in Training
    Join Date
    Jan 2019
    Location
    Indiana
    Posts
    17
    Quote Originally Posted by Jace Jackson View Post
    Nothing it was bone stock. But the stock VE table on those trucks is horrible. This is set for 91 octane, truck drives amazing and shifts perfectly. I have updated the tune and will post tomorrow.
    ok sounds good if could also post your channel setup in the scanner

  13. #13
    Tuner in Training
    Join Date
    Jul 2017
    Posts
    27
    2000 Chevy Silverado Zack Conner Tune 11 Final.hptLS Graph GEN 3.Layout.xml
    I have attached the tune and graph setup for you

  14. #14
    Potential Tuner
    Join Date
    Aug 2020
    Posts
    2
    hi guys newbie trying to learn some of this tuning jargon i have a 1999 silverado with a 5.3 and i have put the summit stage 1 drop in truck cam 8712 ,changed intake to bread box style off a 2007 tahoe with the injectors and i also put one of the g 92mm throttle bodies with my stock tps and iac on it as they seem to work better, also using the 07 map sensor iv been watching goat rope and chopperdoc and reading pages and pages on forums but just cant figure out what needs attention it lacks power from take off and doesn't down shift at all at higher gears just bogs down if anyone could please help as im a old school carb guy and i feel as this is Chinese arithmetic lol ,thanks in advance run2.hpl