Cant get this pig to idle right,
build is a 2009 6.1 challenger, 6spd manual, kenne bell 2.8LC 9psi pulley, oem mopar demon (deka) injectors, 148mm throttle body.
I tried to copy and paste injector data from a stock 6.2 demon file and that yielded an idle at around .7 lambda.
so i played with the IPW/fuel mass tables and the offset table substantially and was able to get it to idle close to 1.0
then i played with my throttle body airflow tables lots to get it to idle at my commanded RPM and clean up the surging. This worked ok but only with sensed MAP disabled. Id like to run with sensed MAP enabled so i flashed that in and BOOM, car idles at like 1500RPM!
So i continued to mess with the throttle body tables and made some changes to spark tables to get it to stay steady at 16* idling. Ive lowered the numbers in these TB tables so much with little effectiveness.
Could somebody be my hero and look at the log and file and see what the hell im doing wrong? I just need to get this thing idling well so I can get to P/T tuning. I have a feeling i have a MAP sensor problem
Car is also forced in Open Loop right now so i dont have fuel trims in my way.
THANKS IN ADVANCE!!!
2009 srt challenger demon injectors rev#4 current july 20 20.hptidle issues srt july 20-20.hpl