looking for anyone that has injector data on some AUS injectors. the fuel mass vs inj pw data for AUS 925cc injectors part number is 10093-925. using the 1000cc data from FIC I can get the car to idle perfect and solid AFR but drivability is crap. the original data I have it idles alll the way lean and drives good. only way I can get the idle AFR good on the original data is having the idle section of my VE bank 1 table to 120%. the only data I have that I know is right is off the data sheet that came with them but that shows only min PW and offset. to anyone that can steer me in the right direction that would be greatly appreciated!!!