i hope anyone can help me with my 3.0L
I`ve have a tune from a Tuner but the communication with my tuner became less and less until he no longer answered me.
The tune works well but at around 5700RPM i run into the Injector Limit.
He told me that i`ve to "extend my EOI or change my SOI to increase the window"
I have attached my OEM values of my EOI and my changes.
From what i`ve read in the 3.5L Ecoboost thread it isn`t that easy right?
But they have you limited stock with the max injection window at 253 already,
SOI Minimum - Max Inj Angle = EOI
If you raised the max injection to 283 it will match the stock eoi of 100 in the pictures. I would try that first and then lower the eoi/raise the max angle a little if its not enough.
The one shot intake whats the max they have in there?