Results 1 to 12 of 12

Thread: IDLE STABILITY ISSUE - What values do you guys change

  1. #1
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603

    IDLE STABILITY ISSUE - What values do you guys change

    What values are you guys changing to control the idle? After a cam swap.....My idle is bouncing all over the place

  2. #2
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    Anyone? The idle is stable but if you give it revs it will take a minute to settle back. In drive it surges. I've been playing with the idle torque throttle fields. Am I in the right place?

  3. #3
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    what year model

    when doing a cam swap there is about 30 different tables to rearrange in a dodge
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  4. #4
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    2015 5.7 Charger

  5. #5
    It's going to be mainly fueling in the ve..

  6. #6
    or in your case. Neural network "virtual ve" if its got a 4 degree..

  7. #7
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    I started ANN tuning the car and its pretty dialed in at idle. Fuel trims seem legit but when you blip the throttle it hunts to find it. Also, it surges in drive.
    Coming from GM it just seems like it needs a little more idle airflow. The cam isn't that large but it needs some more air.
    Last edited by JASON11WS6; 08-09-2020 at 11:08 PM.

  8. #8
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    The car runs fine, doesn't surge but it seems to bog a big on medium to hard braking. Airflow drags down a bit and the car dies on occasion. Any recommendations?

  9. #9
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post the tune
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  10. #10
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    So this is the latest tune we had. Car runs fine but dies during braking and turning with no gas. Just straight braking hasn't seemed to kill it yet. I don't think it died on this scan but it does dip well below idle a few times and bounces back.


    q.final.002.hptQ.FINAL.002.hpl

  11. #11
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    you will never get your fueling right with stock VE and keeping Neural Network active
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  12. #12
    Advanced Tuner
    Join Date
    Jun 2018
    Posts
    603
    Yeah, I learned that pretty quick. I regret trying the ANN set up with this setup. I'll keep ANN tuning to only bolt on cars from now on but this car is fully tuned. It runs good and is dialed in except for this dying issue. I don't think it's the fueling either. It seems solid and the fuel trims look good but it seems like it isn't getting the air needed.
    Last edited by JASON11WS6; 08-21-2020 at 05:32 PM.