Hello, I did the 24x swap on my SBC 406. The computer came from a 2000 5.3 truck. Even though I repined the coil packs and injectors for the change in firing order do I still need to change the firing order and injector bank assignments in the tune? I made the changes that you would make if it was the 411 computer but this is not the 411. Any clarification. Thanks.
Change injector bank select!! Love the old SBC with lsx computers!
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
01101001
1997 30th SS. Torqhead 24x, TFS heads, 223/235 cam, 4l80e, S60 D1SC 14psi
Thanks!
Do I still change the firing order in the tune or will re-pinning the coil packs take care of the firing order change? Thanks.
Repinning the injectors and coils will do it.
The only advantage of changing the firing order is for correct cylinder misfire detection.
1997 30th SS. Torqhead 24x, TFS heads, 223/235 cam, 4l80e, S60 D1SC 14psi
Thank you.
Reply With Quote