Results 1 to 3 of 3

Thread: JL Wrangler OS 68405154AG

  1. #1
    Tuner in Training
    Join Date
    Jun 2020
    Posts
    15

    JL Wrangler OS 68405154AG

    Has anyone read the contents of a GPEC2A with OS 68405154AG? Attached is the file I read from my 2019 Wrangler 3.6l, and some things just don't look right. Here are a few examples:

    1) Fuel->Oxygen Sensors->Goal Lo Limit: Values look like lambda, not FAR. The values are outside of the valid range in VCM editor.
    2) Fuel->Oxygen Sensors->Goal Hi Limit: Values look like lambda, not FAR. The values are outside of the valid range in VCM editor.
    3) Airflow->Speed Density->VE Bank 1: Table is all zero.
    4) Airflow->Speed Density->VE Bank 2: Table is all zero.

    These are just a few of the things that make me think VCM Editor may not be mapping this OS correctly.
    Attached Files Attached Files

  2. #2
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    You are probably correct, but I haven't looked at the file.

  3. #3
    Tuner in Training
    Join Date
    Mar 2017
    Location
    Detroit
    Posts
    41
    My VE banks 1 and 2 are also zeroed? Thought it was normal when running ANN on?