Results 1 to 6 of 6

Thread: Bench harness?

  1. #1
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    629

    NGC Bench harness?

    Anybody want to share plans for an NGC bench flash harness?

    How about GPEC?

    How about where does the resistor go?
    Last edited by spoolboy; 3 Weeks Ago at 07:33 AM.
    If in doubt, multiply everything by 1.1.

  2. #2

  3. #3
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    629
    If in doubt, multiply everything by 1.1.

  4. #4
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    629
    NGC_BENCH_HARNESS.xlsx

    The 120ohm terminating resistor may not be used on all applications. Specifically some of the early stuff like PT & SRT4. YMMV. Try it the other way if it doesn't work.
    Last edited by spoolboy; 3 Weeks Ago at 07:29 AM.
    If in doubt, multiply everything by 1.1.

  5. #5
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    629
    Ok, lets try for a GPEC harness.

    Found this:

    https://www.te.com/global-en/product...alse&instock=N

    And:

    Quote Originally Posted by Homer
    I believe only cavity C1 is used.

    Pins are:

    23 - 12V
    75 - 12V
    96 - 12V

    33 - Can L
    57 - Can H

    72 - GND
    If in doubt, multiply everything by 1.1.

  6. #6
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    629
    If in doubt, multiply everything by 1.1.