Results 1 to 9 of 9

Thread: Bench harness?

  1. #1
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815

    NGC Bench harness?

    Anybody want to share plans for an NGC bench flash harness?

    How about GPEC?

    How about where does the resistor go?
    Last edited by spoolboy; 09-02-2020 at 07:33 AM.
    If in doubt, multiply everything by 1.1.

  2. #2

  3. #3
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    If in doubt, multiply everything by 1.1.

  4. #4
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    NGC_BENCH_HARNESS.xlsx

    The 120ohm terminating resistor may not be used on all applications. Specifically some of the early stuff like PT & SRT4. YMMV. Try it the other way if it doesn't work.
    Last edited by spoolboy; 09-02-2020 at 07:29 AM.
    If in doubt, multiply everything by 1.1.

  5. #5
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    Ok, lets try for a GPEC harness.

    Found this:

    https://www.te.com/global-en/product...alse&instock=N

    And:

    Quote Originally Posted by Homer
    I believe only cavity C1 is used.

    Pins are:

    23 - 12V
    75 - 12V
    96 - 12V

    33 - Can L
    57 - Can H

    72 - GND
    If in doubt, multiply everything by 1.1.

  6. #6
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    If in doubt, multiply everything by 1.1.

  7. #7
    Tuner fumanchu182's Avatar
    Join Date
    Oct 2019
    Location
    Maryland
    Posts
    78
    Not trying to ressurect a dead thread but I figured I'd put the information out there. I made a bench harness last week. I documented all of it here: https://www.hellcatforum.org/threads...trollers.9475/
    Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
    Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).

    https://youtube.com/user/fumanchu182

  8. #8
    Advanced Tuner
    Join Date
    Nov 2017
    Posts
    815
    Thanks. There's not much out there for us Mopar guys, any additions are welcome.

    I also have a facebook group for Mopar HP Tuners that now has quite a few members. I have more bench harness info there in "FILES" at the top of the group.

    Here is a link to the group:

    https://www.facebook.com/groups/450134375944901
    If in doubt, multiply everything by 1.1.

  9. #9
    Tuner fumanchu182's Avatar
    Join Date
    Oct 2019
    Location
    Maryland
    Posts
    78
    Quote Originally Posted by spoolboy View Post
    Thanks. There's not much out there for us Mopar guys, any additions are welcome.I also have a facebook group for Mopar HP Tuners that now has quite a few members. I have more bench harness info there in "FILES" at the top of the group.Here is a link to the group:https://www.facebook.com/groups/450134375944901
    Unfortunately I don't do FB, sorry. If you would like to post the information up on the FB group that's fine with me.
    Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
    Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).

    https://youtube.com/user/fumanchu182