Anybody want to share plans for an NGC bench flash harness?
How about GPEC?
How about where does the resistor go?
Anybody want to share plans for an NGC bench flash harness?
How about GPEC?
How about where does the resistor go?
Last edited by spoolboy; 09-02-2020 at 07:33 AM.
If in doubt, multiply everything by 1.1.
Last edited by spoolboy; 08-21-2020 at 07:25 AM.
If in doubt, multiply everything by 1.1.
If in doubt, multiply everything by 1.1.
NGC_BENCH_HARNESS.xlsx
The 120ohm terminating resistor may not be used on all applications. Specifically some of the early stuff like PT & SRT4. YMMV. Try it the other way if it doesn't work.
Last edited by spoolboy; 09-02-2020 at 07:29 AM.
If in doubt, multiply everything by 1.1.
Ok, lets try for a GPEC harness.
Found this:
https://www.te.com/global-en/product...alse&instock=N
And:
Originally Posted by Homer
If in doubt, multiply everything by 1.1.
If in doubt, multiply everything by 1.1.
Not trying to ressurect a dead thread but I figured I'd put the information out there. I made a bench harness last week. I documented all of it here: https://www.hellcatforum.org/threads...trollers.9475/
Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).
https://youtube.com/user/fumanchu182
Thanks. There's not much out there for us Mopar guys, any additions are welcome.
I also have a facebook group for Mopar HP Tuners that now has quite a few members. I have more bench harness info there in "FILES" at the top of the group.
Here is a link to the group:
https://www.facebook.com/groups/450134375944901
If in doubt, multiply everything by 1.1.
Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).
https://youtube.com/user/fumanchu182