Going E85 and would like to tune these injectors for pump gas first.
Can someone get me started on injector tuning with ford logic?
I have a set of Bosch 80lbs.
Thanks for your time!
Going E85 and would like to tune these injectors for pump gas first.
Can someone get me started on injector tuning with ford logic?
I have a set of Bosch 80lbs.
Thanks for your time!
Do you have injector data?
The provider sent not ford specific data.
Also, The Bosch Dearschwerks site does not list data for the V6 mustang past 2010. Can I enter data for a 47lbs injector under the coyote list? Or do I enter data for an 80lbs even though im not running 80lbs?
You can check Ford Racing performance site to see if they have data for 80lb. That might get you close.
Injectors are all made different so the things like dead times and things like that are different.
Data on the manuf site does not match value labels on HP tuners. At least the beta version.
Ive found what seems to be correct data but the delta values dont match up. For example its calling for pressure values from 70.3 to 39.3 and the values in ford logic are 70.1 to 50.0.
interpolate it so it matches up
Ive never heard of bosch 80s before. Hopefully you didnt get knock offs.
decipha @ EFIDynoTuning
http://www.efidynotuning.com/
Do you have the LU80s?
Knock Retard is the reduction or prevention of knock by lowering ignition timing:
(+) Adding Knock Retard = Reducing Timing. PCM is seeing knock.
(--) Lowering Knock Retard = Increasing Timing. PCM isn't seeing knock.
__________________________________________________ ________
2014 Mustang GT Premium. VMP Gen2R Supercharged with an FTI 3000rpm Converter. JLT, BMR, Steeda, Viking, etc.
Don't fix it if it ain't broken | Maximum effort gets maximum results
I got remanufactured 80s from a reputable shop. Using BOSCH 0280158191 for the core.
Is editing the ford deltap row values match the published data a good idea?
This is the data that was provided. He called them offsets and dead times. I see the offset data but dont quite understand the table logic and I may not be understanding the units of the test sheet. How would i apply this to ford injector control data?IMG_0380.jpg IMG_0381.jpgIMG_0386.jpg
Last edited by SoulMusicRelation; 08-20-2020 at 06:11 PM.
i posted the injector data they provided below. Any help would be appreciated, thanks.
Now, throw these away and buy something that comes with SAE data.
v-performance.pl/
facebook.com/veee.performance/
https://www.instagram.com/v.performance.pl/
Remote tuning:
[email protected]
+48 697276579