Results 1 to 6 of 6

Thread: 2018 Camaro SS with Auto, not able to disable DOD???

  1. #1

    2018 Camaro SS with Auto, not able to disable DOD???

    (Solution Found, and posted down below) Hey guys. I just recently tuned a 2018 Camaro SS with an automatic transmission for a customer which the DOD was disabled, however he is telling me that the DOD is still coming on. I have not seen the car yet so I wasn't able to confirm, but is there another parameter I need to change to turn the DOD off? Could it have something to do with the auto transmission (which I haven't tuned) that could be overriding it and keeping the DOD active?

    Any help would be greatly appreciated.
    Thanks
    Last edited by Musky@RG; 06-01-2021 at 07:13 PM.

  2. #2
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,373
    They turn off just fine...

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  3. #3
    Senior Tuner
    Join Date
    Mar 2011
    Location
    Ripley, MS
    Posts
    1,865
    Just like Ben said, those are no problem to disable. The V6 Camaros are a different animal though...

  4. #4
    "Solution Here" Just a heads up if anybody else has the same issue. Apparently there is an error in the coding of HP Tuners for the "disable" dropdown box on some vehicles. I changed the DOD parameters so that they will never be satisfied and I was able to disable it.

  5. #5
    Potential Tuner
    Join Date
    Jun 2021
    Posts
    6
    Sorry to jump in, new here. So can you deactivate DOD without installing a DOD "Delete Kit" by replacing like the cams and lifters.

  6. #6
    Tuner
    Join Date
    Jan 2019
    Location
    Bonita Springs
    Posts
    108
    Quote Originally Posted by Woodysgarage View Post
    Sorry to jump in, new here. So can you deactivate DOD without installing a DOD "Delete Kit" by replacing like the cams and lifters.
    Correct you just use the disable tab, But if you have the same problem Musky@RG experienced then just make the parameters so the car will not fall within the range to satisfy them..

    Ryan