2006 Mustang GT with Roush M90 need help for Auto to manual transmission swap

[Sprudel]

Hello, I'm going to finish the mecanical part of my 2006 Mustang GT auto to manual transmission swap.

Now I need help to configure the ECU. In the transmission settings in vcm, there is a switch to deactivate the auto transmission. So on so good, but some parameters are missing. As the Torque Truncation tab. If I select disable automatic, all the automatic trans settings are still visible.

Will this work anyway?

I have attached my modified file, this is how I plan to use it on the ecu. Will this work?

I would be much more happy if I could use the 07 roush file (this is out of the repository) but I cant upload it because I have no license for this.

I think the auto ecu and the manual ecu are physicaly the same!?


Is there any way to fully convert the tune of my car to an manual tune, so VCM only showes the manual stuff?

Maybe Eric can do this for me?


Thanks and greetings from Germany Tim

07 roush(1).hpt

2006gt_auto_to_Manual_conversion_my_file.hpt

[B E N]

STOCK TUNE VERY IMPORTANT.hpt

Compare your trans parameters to that.

[Sprudel]

Is this a tune you used for a swap?

[B E N]

No, that's a stock 06 gt with a manual trans.