Results 1 to 3 of 3

Thread: resync problem

  1. #1
    Potential Tuner
    Join Date
    Sep 2020
    Posts
    1

    resync problem

    Hello, i bought brand new MPVI2 with credits, but when i am trying to resync, it is writing "Resync failed.NameResolutionFailure". What i am doing wrong?

  2. #2
    Potential Tuner
    Join Date
    Sep 2018
    Location
    Seattle area
    Posts
    1
    I am also having problems with my MPVI2, I purchased additional credits and cannot get the interface to resync, error: client version not supported. In the editor, help, MPVI2 verification code, it will populate serial number and verification code, so its reading the interface. I'm not sure where to go with this, but I have an 07 canyon that will not start at my shop, passlock issues, customer cut the wires under the column years ago, never had a problem until now. I figured it would be worth the 100 bucks just to get rid of the car, but now what?

    I updated VCM tuner, that solved resync problem, canyon lives
    Last edited by gt40miata; 09-29-2020 at 08:47 AM.

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    sounds like you are using old software, update your software & try again.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"