Results 1 to 3 of 3

Thread: Tundra Tow/Haul sensitivity in Drive

  1. #1
    Potential Tuner
    Join Date
    Aug 2020
    Posts
    4

    Tundra Tow/Haul sensitivity in Drive

    Good afternoon everyone.

    I have the MVPI2 for my 2018 Tundra. What I'm trying to do is to map over the throttle sensitivity to D, that it has in tow/haul. Looking at the file, it looks like all I would have to do is copy the tables from tow/haul to normal under desired throttle angle. Does that make sense?

    Throttle sensitivity.png

  2. #2
    Quote Originally Posted by dks0111 View Post
    Good afternoon everyone.

    I have the MVPI2 for my 2018 Tundra. What I'm trying to do is to map over the throttle sensitivity to D, that it has in tow/haul. Looking at the file, it looks like all I would have to do is copy the tables from tow/haul to normal under desired throttle angle. Does that make sense?

    Throttle sensitivity.png
    Yes, make sure to copy the axis labels as well (click on the axis title - any axis title that's underlined can be edited).

  3. #3
    Potential Tuner
    Join Date
    Aug 2020
    Posts
    4
    Quote Originally Posted by SlowNStock View Post
    Yes, make sure to copy the axis labels as well (click on the axis title - any axis title that's underlined can be edited).
    Thank you.

    This might sound like a dumb question, how do I do it?

    Axis Labels.png

    NVM. Figured it out. For anyone else, click on the axis name, and copy over the numbers.
    Last edited by dks0111; 09-02-2020 at 11:03 AM.