Results 1 to 4 of 4

Thread: Need some help with this tune

  1. #1
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    5

    Need some help with this tune

    Hey guys I've installed a GPI SS3 VVT cam in my 2013 Camaro SS with Circle D's 4C converter. I keep getting a P0011 code about intake cam is too advanced. Can anyone help me out with this tune, I know the parts were installed correctly and everything timed correctly.

    Mods:
    Cold Air Intake by Cold Air Inductions w/air scoop and washer bottle relocation
    Vmax ported throttle body
    RX catch can
    Pfadt 1 7/8" tri-y long tube headers
    cat delete
    Stainless works retro chambered 3" catback
    3.91 rear end upgrade
    GPI's SS3 VVT cam

    Cam specs:
    228/246 in/ex duration
    .647/.637 in/ex lift
    112 LSA
    +6 ICL

    any and all help would be greatly appreciated. I will also attach the current tune on the car

    Thank you for your time,
    Mike
    Attached Files Attached Files

  2. #2
    Tuner
    Join Date
    Jan 2019
    Location
    Bonita Springs
    Posts
    107
    Are you logging Intake Desired Camshaft angle vs Intake Camshaft angle?

  3. #3
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    5
    yes, I'm logging both and they are pretty much the same. Here is an updated tune and log file from yesterday
    Attached Files Attached Files

  4. #4
    Tuner in Training
    Join Date
    May 2018
    Posts
    10
    set P0010 and P0011 to no error reported. This is how GPI set mine.
    You wouldnt happen to have your cam card still would you? I have same cam as you. My wife tossed mine out and im needing .006 duration specs.