Hello,
I am trying to connect to a new vehicle I bought (2004 Blazer with 4.3 v6) and am unable to read the vehicles file. It starts out fine. Then the time remaining starts to go up and up until it says failure. Then it sets the VATS and vehicle is dead. I am also having problems connecting to scanner. It takes several tries but it will connect and then I can relink the vats and the vehicle is back to normal. I have updated the software, updated the drivers and resynced to no avail. I only use this for myself not as a profession. But I have done quit a bit of tuning on a LS swap I did to my 03 s10 with no problems. Any Idea what I'm running into here? Any info you need from me to help out with this? Let me know. Please help. I just want to disable the vats on this Blazer because its always a problem and I don't want to get stranded anywhere. LOL and adjust my Power enrichment a bit also. But need to get into it first.
Thanx in advance for any help you can give.
Cory